Shower Rod & Curtain Installation

One more part of the master bathroom accomplished. Once I get the last two things done, lay new flooring and paint sink cabinet, I will have to post before and after pictures. It is already different, but it will be drastically different from top to bottom after everything is done.

At first I purchased a standard curtain rod, but after seeing a curved curtain rod at a friend’s house, I returned the standard one and purchased a curved curtain rod by Moen in brushed nickel. There is so much more room in the shower and the shower curtain liner actually stays in place rather than moving into the tub.

IMG 5407 1 Shower Rod & Curtain InstallationIMG 5410 1 Shower Rod & Curtain InstallationIMG 5418 1 Shower Rod & Curtain Installation

The curved curtain rod is a little harder to install, but installation went well with only a few hiccups. I had to use screws with anchors for the drywall where I didn’t find a stud and then used a wood screw where I did find stud. That is what I expect from our walls though, so that was no surprise.

IMG 5413 1 Shower Rod & Curtain InstallationIMG 5416 1 Shower Rod & Curtain Installation

Once the curtain rod was up, I was finally able to hang my new shower curtain. The curtain rod ended up a little high, but at least the curtain reached past the top of the tub.

IMG 5420 1 Shower Rod & Curtain Installation

2007 Updates

I wrote about some of the changes around my house from 2007 and backdated them so they fit in chronological order. Here are the links to the new posts:

Hallway Organization

I was finally able to get the Closetmaid 9 Cube Storage Cabinet after a few months of waiting for it to go on sale. It was easy to put together and took maybe 45 minutes total.

IMG 5320 1 Hallway OrganizationIMG 5327 1 Hallway Organization

In the before picture, I used a shoe storage cabinet with some shelving removed to make room for the cloth baskets. In the after picture, the new cloth cubes hold much more than the old cloth baskets and thus more can fit in a smaller space. What took the entire area in the before picture, only needs the space of the new 9 cube storage area. I am going to leave the 2 corner shelf units in the area for now, but I don’t know if I will even need them. I think they will be finding new homes.

IMG 5323 1 Hallway OrganizationIMG 5324 1 Hallway OrganizationIMG 5328 1 Hallway Organization

Reupholstering Chair Cushins

Other than watching TV design shows, I had no other education or real life experience associated with the upholstering of chair cushions – until the last few days!

I asked one of my friends if I could upholster her dining room chairs for her. She has two small children and has had the chairs for a while. The frames are in good shape, but the cushions, well, could use a little work. I knew it wasn’t something she would do for herself, and we have been to so many parties and dinners at their house recently that I wanted to do something nice for them.

IMG 4889 Reupholstering Chair Cushins

After one of the parties knowing that we would be back for dinner in a couple days, I took the cushions with me (with permission of course) and planned to get them back to her before we saw them next. I had already purchased the milk chocolate colored vinyl since I wanted to make sure it was okay with my friend before actually starting the project – she liked the color and that it wiped off easily.

The next day, I took the fabric off the chairs and realized the foam was in bad condition. I had anticipated this, but hadn’t purchased anything yet just in case the foam was in good condition. I headed out and found options at Hancock Fabrics. I don’t know if it was the right choice, but I had two things to choose from: Soy foam or Poly-fil. I felt the better choice was the soy foam since it was similar to what my friend had before, it seemed more cushy, and I liked that it was made of soy with less chemicals. The price was almost equivalent at only a $2 difference for the amount I needed.

IMG 4901 Reupholstering Chair Cushins

Taking the fabric off of the cushions was not fun. With Robogrip pliers, hammer, and mini-crowbar, I managed to get all of the staples pulled from the wood. The staples that wouldn’t come out of the wood with the Robogrips were hammered in so that they wouldn’t catch on anything. I sanded the wood with a sandpaper block to clean it up. My hands were tired from all of the pulling/gripping and my knees and legs were tired from having to stand on the wood part of the cushion so that I had enough leverage to pull the fabric off and the staples out – I felt the jolt as each staple came out. After the hour it took to remove the old materials, I had had enough, and I left the reupholstering for the next day.

IMG 4893 Reupholstering Chair CushinsIMG 4892 Reupholstering Chair CushinsIMG 4896 e1268588904959 Reupholstering Chair CushinsIMG 4897 Reupholstering Chair CushinsIMG 4898 Reupholstering Chair Cushins

The next phase was to cut the foam and vinyl to fit the wood and then staple the vinyl on. This part of the process took 1 hour 45 minutes. The first one took me the longest at about an hour with getting set up, the measurements just right, and the staple gun to work; but after that, it only took 15 minutes for each of the other 3 cushions.

IMG 4904 Reupholstering Chair CushinsIMG 4906 Reupholstering Chair CushinsIMG 4907 Reupholstering Chair CushinsIMG 4908 Reupholstering Chair CushinsIMG 4909 Reupholstering Chair CushinsIMG 4913 Reupholstering Chair CushinsIMG 4916 e1268588840861 Reupholstering Chair CushinsIMG 4914 Reupholstering Chair CushinsIMG 4915 Reupholstering Chair Cushins

This evening, we took the cushions to my friends’ house and their 4 year old daughter helped me by handing me screws while I attached the cushions. She even slid the next chair into the room when I needed the next one. All of the chairs were fixed in time for dinner and then used in conjunction with 2 sheets for a tent later that evening to play under.

IMG 4922 Reupholstering Chair Cushins

The process of reupholstering the chairs was harder than I thought, but my learning curve was steep so it didn’t take me very long at all – a total of 2 hours 45 minutes (not including shopping time). I think they look really nice and I know my friend and her husband like them too. Now I can say I have reupholstered chair cushions! I have two chairs of my own that I have wanted to do this to but didn’t know if I could. They are just hardwood and I would love cushion on them – I think that will be a project for next month or later this one if I get the other things done on my list.

Medicine Cabinet

One more part of the master bathroom is done. It is slow going but I am determined to get it done amongst all of the other things I want to work on. The bathroom is looking awesome. Only a couple more steps left.

IMG 4825 Medicine CabinetIMG 4824 Medicine CabinetIMG 4826 Medicine Cabinet

The G5 George Foreman Grill

For Christmas, from my parents, we received a G5 George Foreman Grill.

IMG 3554 1 The G5 George Foreman Grill

It came with 5 interchangeable plates; and after the holidays, we purchased two more – the omelet plates. We now have 7 plates and about 4 different combinations:

#1: Grill plates. Anything you want to drain fat off of is best cooked on these. I find that it doesn’t drain as well as I would like with it set to the highest tilt setting, so I add an upside down drippings tray behind the back support and then it drains perfectly. We grill chicken pieces and 2 lb slabs of ground turkey on these grill plates the most. We tried something a little different and cooked some tater tots the other day. I call them tater squats since the heaviness of the top plate squished them – but they were still really good and crispy too.

IMG 4087 The G5 George Foreman GrillIMG 4088 The G5 George Foreman Grill

#2: Waffle plates. This is an obvious one. It makes waffles. We make organic whole grain waffles that come out beautifully. Heat the grill on high until the green light goes off. Fill with batter according to directions – I think it says 1/3 cup and I use that on each side. Close. The green light will come back on shortly and then when it goes back off the waffles are done. I think it takes about 3-4 minutes for them too cook. Much better than my Waffle Maker which is going bye, bye. Any takers?

IMG 3632 1 The G5 George Foreman Grill

#3: Flat plate. We have cooked tater tots on it so far. But the booklet says it can make pizza, eggs, cookies, biscuits… well, just about anything you can cook in a pan where you don’t need the fat to be drained. We plan to make corn bread on it next and see how that goes. I would love to try pizza. With this plate orientation, the flat grill goes on the bottom and then the top grill/steak plate goes on top. In the picture below, the top omelet plate was used since I wanted to see if it would work too and it did.

IMG 4280 The G5 George Foreman Grill

#4: The omelet plates. These have to be the coolest plates. So far, we have made egg white omelets and brownies. Making omelets on this grill has to cut breakfast prep time in half. I saw in the booklet that brownies could be made, so I HAD to check it out. I mixed up the batter like usual and filled the 3 reservoirs to the top (should have put a little less but it still worked out) and closed the lid. I think it took maybe 9 minutes and they were done. They are about twice the size of a normal brownie, so serving size would be 1/2 of one of these. Also, if the reservoir was filled only 1/2 way, the brownie would have a really nice curve like the 3rd picture below that was the last of the batter – just about a serving size. As I was taking them off the grill and putting them in a container, my husband told me how appropriate they were for the day we were making them. We aren’t football fans and we made them on Super Bowl Sunday – and they look like footballs!!! Almost like I did it on purpose but I definitely did not. These really would be perfect for football fans with some white icing for laces.

IMG 4128 The G5 George Foreman GrillIMG 4277 The G5 George Foreman GrillIMG 4279 The G5 George Foreman GrillIMG 4278 The G5 George Foreman Grill

So, I highly recommend this grill. The energy savings alone is worth it and it varies in the time it saves depending on which plates are used. It would have taken 10 minutes to heat up the oven and then another 15-20 minutes to cook the brownies. This way it took 5 minutes to heat up the grill and around 18 minutes total to cook the two batches of brownies. I can’t make a $ savings equivalent since I don’t have one of those energy calculators for electrical outlets YET, but I know there is definitely a substantial savings between heating a small grill and heating a standard sized oven.

If you are looking for an easy way to cook stuff, this is it. Within 5 minutes, it is warm on high and cooks fast too. The practicality far outweighs its only negligible shortcoming I have found so far. If you aren’t used to the interchangeable plate type grills, the plates take a little getting used to but once clicked in, they are secure. I have used this type for a while and I think it is easy once you get used to how they fit.

I think if we lived in an apartment, a small space where we couldn’t have a kitchen, or were remodeling a kitchen, this would be one of my top 3 items along with a microwave and fridge. One of the best gifts we received for Christmas!

Painting the Master Bathroom

At a little before noon, I decided that I would scrapbook this weekend and finally start working on the master bathroom today.

I started by wiping down the walls and floor which is something that was long overdue. I patched all of the little holes in the walls with light Spackle and made lunch while I waited for it to dry. Once dry it was finally on to painting. I usually trim the walls first, but wanted to see progress quickly, to keep me motivated, so I put paint on the roller and did the large portions first.

Trying to cover orange wasn’t as bad as I thought, but it did take 2 coats. I just love this Sherwin Williams Harmony no-VOC paint and the color is Temperate Taupe 6037. Just a little bit of smell from the latex paint but no stuffing of my nose or headaches. I still had the fan on since I always do that when I paint since it helps it dry.

I tried a new smaller roller this time and I really like it. It is lightweight and can fit behind the toilet to paint the wall that had never been painted before. I had to loaded it with paint more often, but I think I will use these more in the future. Also, with this smaller roller, there were a lot less drips.

IMG 4134 Painting the Master BathroomIMG 4136 Painting the Master Bathroom

IMG 4138 Painting the Master BathroomIMG 4137 Painting the Master BathroomIMG 4135 Painting the Master Bathroom

It was starting to get dark when I realized I needed to install the new vanity light so I could finish trimming. The fixture is from Lowe’s and it in the mix and match collection where the fixture and glass shades are purchased separately – so I could get just what I wanted. The shades are white but I am using CFL’s and they weren’t completely warmed up yet when I took the picture below. With a little bit of light from the bedroom, I was able to finish the area I needed to so that I could install the light.

IMG 4146 Painting the Master BathroomIMG 4133 Painting the Master BathroomIMG 4149 Painting the Master BathroomIMG 4151 Painting the Master Bathroom

Once the light was installed I was able to finish trimming with lots of light. It looks like I might have to do a second coat of trim, but I will see what it looks like in the morning.

IMG 4161 Painting the Master BathroomIMG 4160 Painting the Master Bathroom

I hope that I can install the medicine cabinet and shower rod & curtain in the next couple days maybe tomorrow.

Many Updates

A few months back, I did a bunch of updates around the house, but the updates never made it to this blog. I am finally writing the posts, and I want to let everyone know which posts are new.

I thought there were only 8 posts to catch up on, but with further inspection of my pictures, I found that there were 8 in September 2009 alone and not even counting what I missed in other months. Once I finished up all of the posts, updating from January 2008 – December 2009, there ended up being 15 posts from the last 2 years. I thought there were going to be a lot more updates than I expected, but I had actually kept up with my posts somewhat and/or didn’t do much certain months in the way of interior design or organizing.

Here is a list of the new posts that didn’t make it to Google Reader:

And a list of the ones that did make it to Google Reader:

Bead Tackle Box

One of my January goals is to start making and selling necklaces on Etsy. With all new ventures, there is start-up involved. My start-up involved: beads, wire, and a way to organized everything. I purchased new materials and made 3 new necklaces to list and then wondered how many other materials I had but knew that most were in a bin upstairs that took me bringing everything out of the bin to see what I had. I was determined to get my beads and supplies organized.

While celebrating my birthday by going out to dinner with my husband’s dad and step-mom, we got to talking about my crafting hobbies. I mentioned wanting to organize my beads and my husband’s dad suggested using a tackle box. I said that I had looked into them briefly a little while ago and hadn’t found anything that would work. When we got home, I started looking at tackle boxes – they have come a long way. After searching that evening, I narrowed my choices to 3 possibilities. I mentioned to my husband my choices and my logic.

My logic being: When I am looking at two things where one is a cheaper version and the other is better quality version, to wait, do my research, and consider that later I will probably want the better quality one. Money is saved in the long run not buying the cheaper one just to turn around and buy the better quality one later. There is less waste and time is saved too since I won’t be trying to sell the old things. I’ve been trying to follow this logic for a little while now – some things are just not possible, but in most cases the logic works pretty well.

The tackle box I finally chose, ordered, and received has the potential for almost 200 compartments! I know it was a bit much in cost, but every last bead I own fits in this box plus lots of room to grow. I could even use it for lots of other craft stuff should I decide not to continue with beading after a while – even though I have been beading something since sometime before my teens. This afternoon and evening I worked on sorting the beads and filling up the tackle box. Now, I need to list the necklaces on Etsy by the end of the month. Hopefully, they will sell and I can make more and get some real use out of this tackle box!

IMG 3709 1 300x225 Bead Tackle BoxIMG 3692 1 300x225 Bead Tackle Box

IMG 3697 1 225x300 Bead Tackle BoxIMG 3718 1 225x300 Bead Tackle BoxIMG 3716 1 300x225 Bead Tackle Box

Child-Friendly Ornaments

This year for Christmas I was planning on making my friend’s children pillow case covers with their favorite things right now, but ended up running out of time. So, I was looking around Michael’s Craft Store for some inspiration and something I could do rather quick but would still be well received. I remembered that my friend was using paper ornaments this year for her Christmas tree due not wanting her ornaments broken (the children are 1 & 3). I found some wooden figures that I thought I could turn into ornaments with some wire and hotglue. With the selection I had, I chose what I thought they would like. A butterfly and dog for the girl and a turtle and train for the boy. I thought that even if they do get broken, they are wood and can easily be glued back together.

IMG 3216 1 Child Friendly Ornaments

Update: Shortly after the holidays, we went to see my friend and her husband and gave her children the ornaments. They were sweet at first and looked like they liked them. They were put on the tree and all was good. Until their son swatted at the one playing with it and then their daughter proceeded to swing at them all and throw them to the floor one by one – they did not get broken! I would have normally taken some offense and thought they really didn’t like the ornaments, but hopefully this behavior of  “removing” the ornaments is why my friend did not put her good ornaments on the tree. Once they went up to bed, I casually walked over to the little beaten down ornaments, made sure they were okay, and placed them back on the tree. Maybe tomorrow will be a better day for the ornaments?